Table of Contents
Advertisement
Maintenance Summary - Care activities
AM043
- Check pneumatic system (visual inspection)
Orientation
Maintenance Instructions
MS24-6
DIM123EN - 26.04.2022
Carrying out the maintenance activities described below requires
special knowledge. For this reason, these maintenance activities
must only be carried out by staff that has received adequate training
by the machine manufacturer!
Operating fluids such as hydraulic fluids, cooling lubricants, lubricating greases/oils
are also subject to degradation or aging as the components involved in this process,
and must therefore be serviced, refilled or replaced at regular intervals.
To ensure trouble-free operation, periodic checks of the pneumatic system are
necessary.
-
Check pressure setting on pressure gauge.
-
Check fluid lines.
-
Check silencers.
-
Drain off condensate.
-
Check filters, replace if necessary.
Due to different requirements and/or specifications of the respective
manufacturers, be sure to review the respective manufacturer's
documentation!
19
Advertisement
Table of Contents
