Table of Contents
Advertisement
CM025
- Check hydraulic system
Orientation
Requirement
58
Carrying out the maintenance activities described below requires
special knowledge. For this reason, these maintenance activities
must be carried out only by authorized personnel of the
manufacturer!
To check the settings of the various components, they can be made
visible in the control system in the Sensor System area. Refer to the
section on the sensor system in the documentation Operation of the
Machine.
Operating fluids such as hydraulic fluids, cooling lubricants, lubricating greases/oils
are also subject to degradation or aging, and must therefore serviced, refilled or
replaced at regular intervals. The hydraulic fluid must be changed periodically to
ensure reliable operation of the machine. Review of the maintenance and service
logs.
Example: Hydraulic unit MS24-6
a
Accumulator drain valve
1
Pressure gauge for system pressure
2
Hydrostatic pressure gauge
X
Hydraulic fluid filter
Y
Filter bowl
The maintenance of the hydraulic system requires the following auxiliary or working
equipment:
-
servicing, testing and maintenance schedules/logs of the customer.
-
Use an ample supply of cleaning rags – no cotton waste.
-
A sufficient amount of hydraulic fluid for refilling/changing. - Hydraulic fluid,
specification and quantity as specified in the technical data.
-
Hydraulic fluid filter, main and bypass filter. - Use only original filters.
-
Various sizes of jaw and box wrenches, and Allen keys.
Maintenance Summary - 2.000 Operating hours
Maintenance Instructions
MS24-6
DIM123EN - 26.04.2022
Advertisement
Table of Contents
