Installing 3D Sprint; Sprint - 3D Systems SLA 750 Series User Manual

DNS Server 1 - the internet's system for converting alphabetic names into numeric IP addresses. For display only. This
F
number cannot be changed through this interface.
DNS Server 2 - the internet's system for converting alphabetic names into numeric IP addresses. For display only. This
G
number cannot be changed through this interface.
Apply Button - Tap this button to keep all your changes and go back to the Settings home screen.
H

7.3 Installing 3D Sprint

Note: If you do not have 3D Sprint loaded on your computer you can obtain a copy by clicking
7.4 3D Sprint
1. Open 3D Sprint Software and select Print (1).
2. Select Configuration (2).
3. Select printer from Network/USB Printers list (3).
1. Select Installed Material from list (4).
3D Systems, Inc.
3D Sprint is the 3D Systems' software application used for preparing CAD models
™
to be printed on an SLA printer. It is installed on a standalone computer which is
provided by the customer. Double-click the 3D Sprint icon on your computer/ laptop,
or select it from your list of available programs loaded on your computer. For detailed
information on the features of 3D Sprint, as well as help for part preparation, you can
access the full help document by clicking on the question mark icon inside the 3D
Sprint software.
57
here.
p/n 40-D150, Rev. C