3D Systems SLA 750 Series User Manual page 38

Login Preference: Require users to login with a passcode.
1
Enable Require Passcode for On Local Printer UI and or Remote Connections.
2
Allow Remote Connections:
3
Active Users: Displays the active users for Admin and Standard users.
4
Add User: Create new Admin Users with an assigned passcode.
5
Add Users: Create new Standard Users with an assigned passcode.
6
6.4.3.1 Assigning users and access levels
Assigning users and access levels
1. From the UI, select Settings from the bottom.
2. Select Users screen.
3D Systems, Inc. 34 p/n 40-D150, Rev. C