3D Systems SLA 750 Series User Manual page 8

CAUTION: The Emergency Stop Button should be used when there is a fail situation in the system . Use the
emergency stop button when the system needs to be stopped quickly.
USER INTERFACE LASER LED
The user interface, which is detailed in the section User Interface , contains a tri-colored LED light that indicates whether or not
the laser is enabled. A SLA 750 printer will illuminate a solid blue color when the laser is enabled. A SLA 750 Dual will illuminate
a bright amber color when the right laser is enabled. A SLA 750 Dual will illuminate a bright white color when the two lasers are
enabled. When the laser(s) are not enabled, the LED will be dimmed.
3D Systems, Inc. 4 p/n 40-D150, Rev. C