3D Systems SLA 750 Series User Manual page 60

DHCP - a network protocol that enables a server to automatically assign an IP address to a computer from a defined
A
range of numbers (i.e., a scope) configured for a given network. Uncheck this box to enable editing of the IP Address,
Subnet Mask, Gateway, and DNS Servers.
MAC Address - A hardware address for the network adapter in the printer's computer. For display only. This number
B
cannot be changed through this interface.
IP Address - The numerical address given to your printer on your network. For display only. This number cannot be
C
changed through this interface.
Subnet Mask - hides, or "masks," the network part of a system's IP address and leaves only the host part as the
D
machine identifier. Contact your network administrator if there is a need to change this number.
Gateway - a router interface connected to the local network that sends packets out of the local network. For display
E
only. This number cannot be changed through this interface.
3D Systems, Inc. 56 p/n 40-D150, Rev. C