Adjustment; Operation - Pilz PSEN sl-1.0p 3.1 Operating Manual

PSEN sl-1.0p 3.1
Align the safety switch to the actuator and tighten the screws.

Adjustment

}
The stated operating distances (see Technical details:
actuator [
safety switch and actuator are installed facing each other in parallel. Operating dis-
tances may deviate if other arrangements are used.
}
Note the maximum permitted lateral and vertical offset (see
offset [

Operation

Operating Manual PSEN sl-1.0p 3.1
1003389-EN-04
25], System with free-moving actuator [
11]).
NOTICE
The safety function should be checked after initial commissioning and each
time the plant/machine is changed. The safety functions may only be
checked by qualified personnel.
CAUTION!
Contaminated surfaces can reduce the holding force of the electromagnet.
Make sure that the contact surfaces are clean.
System with normal
28]) only apply when the
Lateral and vertical
21