enphase IQ8 Series Installation And Operation Manual page 26

• IQ Disconnect Tool (Q-DISC-10): Disconnect Tool for IQ Cable connectors, DC connectors, and AC
module mount
•
IQ Sealing Caps (female) (Q-SEAL-10): One needed to cover each unused connector on the cabling
• IQ Terminator (Q-TERM-R-10 for single-phase or Q-TERM-3P-10 for multi-phase): One for each AC
cable segment end; typically, two needed per branch circuit
• IQ Relay: Single-phase (Q-RELAY-1P-INT) or multi-phase (Q-RELAY-3P-INT).
o The multi-phase IQ Relay also provides phase coupling to allow microinverters on all phases to
communicate with the IQ Gateway. Use a Legrand Phase Coupler (LPC-01) for multi-phase
system for phase coupling if IQ Relay is not installed in the multi-phase system.
26 © 2023 Enphase Energy Inc. All rights reserved.
IQ8AC/IQ8HC Installation and Operation Manual
June 2023
USM-00005-2.0