Table of Contents
Advertisement
A+ Server AS -1013S-MTR User's Manual
1.4 Server Chassis Features
Control Panel
The switches and LEDs located on the control panel are described below. See Chapter 4 for
details on the control panel connections.
Item
Feature
1
Information LED
2
NIC2 LED
3
NIC1 LED
4
HDD LED
5
Power LED
6
Reset Button
7
Power Button
Status
Continuously on and red
Blinking red (1Hz)
Solid blue
Blinking blue
1
2
3
4
5
Figure 1-1. Control Panel View
Control Panel Features
Description
See table below for details.
Indicates network activity on LAN port 2 when flashing
Indicates network activity on LAN port 1 when flashing
Indicates activity on the hard drive when flashing.
Indicates power is being supplied to the system's power supply unit. This LED
should normally be illuminated when the system is operating.
The reset button is used to reboot the system.
The main power button is used to apply or remove power from the power supply
to the server. Turning off system power with this button removes the main power
but maintains standby power. To perform many maintenance tasks, you must
also unplug system before servicing.
Information LED
Description
An overheat condition has occurred.
(This may be caused by cable congestion.)
Fan failure, check for an inoperative fan.
Local UID has been activated. Use this function to
locate the server in a rackmount environment.
Remote UID is on. Use this function to identify the
server from a remote location.
10
6
7
Advertisement
Table of Contents
