Dimm Installation; Dimm Removal - Supermicro AS-1013S-MTR User Manual

A+ Server AS -1013S-MTR User's Manual

DIMM Installation

1. Insert the desired number of DIMMs into
the memory slots, there is no specific
sequence or order required
2. Push the release tab outwards on one
end of the DIMM slot to unlock it.
3. Align the key of the DIMM with the
receptive point on the memory slot.
4. Align one notch on one end of the DIMM
against the notch catch of the socket
(this is the end without a release tab).
Insert this end first, then follow with the
other end, making sure the receptive
point and the key are aligned.
5. With one end of the DIMM secured into
the notch catch, press the opposite end
(with the lever) into the slot until the
module snaps securely into place.
6. Lock the release tab to the locked
position to secure the DIMM in the slot.

DIMM Removal

Press the release tab on one end of the
DIMM to unlock it. Once the DIMM is loose,
remove it from the memory slot by gently
puling this end upwards.
.
Receptive
Point
2
33
Key
Notches
1
Release Tab
Lock the
Release Tab
2
Insert
First
Notch Catch
Insert and
Lock Notch
Into Socket
1