Supermicro AS-1013S-MTR User Manual page 29

A+ Server AS -1013S-MTR User's Manual
11. After the force frame is secured and the CPU package is in place, now you must install
the heatsink to the frame. Lower the heatsink down till it rests securely over the four
screw holes on CPU package on the socket frame.
12. Using a diagonal pattern and a Torx T20 driver, tighten the four screws evenly to 16.1
kgf-cm (14.0 lbf-in) of torque. The heatsink will now be secured and you have finished
installing the processor and heatsink onto the motherboard. Repeat this procedure for
any remaining CPU sockets on the motherboard.
#3 Screw
#1 Screw
#2 Screw
29
#4 Screw