Table of Contents
Advertisement
9. Gently lower the force frame down onto the rail frame and hold it in place until it is
seated in the Socket housing. Note that the force frame is spring loaded and has to be
held in place before it is secured.
10. Replace the screws in the order 1-2-3, tightening to 16.1 kgf-cm (14 lbf-in) of torque.
The Force Frame secures both the Rail Frame and CPU package.
Important: To prevent damage to the CPU, use a torque screwdriver with a Torx T20
screw head bit and set to 16.1 kgf-cm (14.0 lbf-in).
Screw #2
Chapter 3: Maintenance and Component Installation
Screw #3
28
Screw #1
Advertisement
Table of Contents
