Manually; Install Oracle Solaris 11.2 (With Sru5 Or Later) Manually Using Local Or Remote Media - Oracle X5-2 Installation Manual

Install Oracle Solaris 11.2 (With SRU5 or Later)
Manually Using Local or Remote Media
This procedure describes how to boot the Oracle Solaris 11.2 operating system (OS) installation
from local or remote media. It assumes that you are booting the installation media from one of
the following sources:
Oracle Solaris 11.2 (with SRU5, or later, required) DVD (internal or external DVD)
■
Oracle Solaris 11.2 (with SRU5, or later, required) ISO DVD image (network repository)
■
If you are booting the installation media from a PXE environment, see
Note -
Oracle Solaris 11.2 (With SRU5 or Later) Using PXE Network Boot" on page 40
instructions.
Ensure that the installation media is available to boot.
1.
For Distribution DVD, insert the Oracle Solaris 11.2 (with SRU5, or later, required) DVD
■
into the local or remote DVD drive.
For ISO image, ensure that the Oracle Solaris 11.2 (with SRU5, or later, required) ISO
■
image is available and that the ISO image has been mounted in the Oracle ILOM Remote
System Console Plus application using the KVMS menu.
For additional information about how to set up the install media, see
Option" on page 13.
Reset or power on the server.
2.
For example, do one of the following:
From the local server, press the Power button (approximately 1 second) on the front panel
■
of the server to turn the server off, then press the Power button again to power on the server.
From the Oracle ILOM web interface, click Host Management → Power Control, select
■
Reset from the Select Action list box, then click Save.
From the Oracle ILOM CLI, type:
■

Install Oracle Solaris 11.2 (With SRU5 or Later) Manually Using Local or Remote Media

reset /System
"Selecting the Boot Media
Installing the Oracle Solaris Operating System
"Install
for
37