Set The Boot Mode - Oracle X5-2 Installation Manual

Oracle solaris operating system

Hide thumbs Also See for X5-2:

Table of Contents

Set the Boot Mode

Note -

Press the F9 key to automatically load the optimal default settings.

A message appears prompting you to continue this operation by selecting OK or to cancel this

operation by selecting CANCEL.

In the message, highlight OK, and then press Enter.

To save your changes and exit the BIOS Setup Utility, press the F10 key.

Alternatively, you can select Save and Reset from the Exit menu.

Set the Boot Mode

The server UEFI firmware supports both Legacy BIOS and UEFI boot modes. Legacy BIOS

Boot Mode is enabled by default. Because Oracle Solaris 11.2 supports both Legacy BIOS and

Oracle Server X5-2 Installation Guide for Oracle Solaris Operating System • April 2015

The BIOS Setup Utility screen might take a while to appear. Please be patient.

Table of Contents

Do you have a question about the X5-2 and is the answer not in the manual?