Install Oracle Solaris 11.2 (With Sru5 Or Later) Using Pxe Network Boot - Oracle X5-2 Installation Manual

Install Oracle Solaris 11.2 (With SRU5 or Later) Using PXE Network Boot

If you elected to use the Oracle ILOM Remote System Console Plus
■
application method in Legacy BIOS Boot Mode, select SATA:DVD:SATA0 P0:
TEAC DV-W28SS-W from the Legacy BIOS Boot Mode version of the Please
Select Boot Device menu screen.
If you elected to use the remote console delivery method in UEFI Boot Mode,
■
select [UEFI]USB:VIRTUAL:Remote Iso CDROM2.04 from the UEFI Boot Mode
version of the Please Select Boot Device menu screen.
The GRUB menu appears.
5. Follow the on-screen prompts to complete the Oracle Solaris installation.
For instructions for completing the Oracle Solaris 11.2 installation (with SRU5, or later,
required), refer to the Oracle Solaris 11.2 installation documentation at
com/cd/E36784_01/index.html.
Related Information
"Install Oracle Solaris 11.2 (With SRU5 or Later) Using PXE Network
■
Boot" on page 40
Install Oracle Solaris 11.2 (With SRU5 or Later)
Using PXE Network Boot
The following procedure describes how to install the Oracle Solaris11.2 (with SRU5, or later,
required) operating system from a PXE network environment.
The following requirements must be met prior to starting the Oracle Solaris 11.2 (with SRU5, or
Before You Begin
later, required) PXE boot installation.
To use PXE to boot the installation media over the network, ensure that the Automated
■
Installation (AI) image install server is setup and accessible to your server over the network.
If your AI server requires the MAC address of an install client, you can obtain your system's
■
MAC address by logging in to the Oracle ILOM SP as root, and typing:
-> show /SYS/MB/NET0 fru_macaddress
/SYS/MB/NET0
Reset or power on the server.
1.
40 Oracle Server X5-2 Installation Guide for Oracle Solaris Operating System • April 2015
Properties:
fru_macaddress = 00:21:28:e7:77:24
http://docs.oracle.