Selecting The Boot Media Option - Oracle X5-2 Installation Manual

To log in to Oracle ILOM remotely using either the command-line interface (CLI) or the web
interface, you must know the IP address of the server SP. For instructions on determining the
server's IP address, refer to
Oracle Server X5-2 Installation Guide
2. If you are using a web-based client connection, perform these steps; otherwise
go to the next step.
a. In a web browser, type the IP address for the server SP.
Log in to the Oracle ILOM web interface.
b.
The default Oracle ILOM user name is root and the default password is changeme.
The Oracle ILOM Summary Information page appears.
Redirect the video output from the server to the web client by launching the
c.
Oracle ILOM Remote System Console Plus application.
3. If you are using an SSH client connection, perform these steps.
From a serial console, establish an SSH connection to the server SP. Type:
a.
ssh root@hostname, where hostname can be the DNS name or the IP address for
the server SP.
b. Log in to Oracle ILOM.
The default Oracle ILOM is root and the password is changeme.
Redirect the serial output from the server to the SSH client. Type:
c.
->
Related Information
Oracle Integrated Lights Out Manager (ILOM) 3.2 Documentation Library at:
■
oracle.com/goto/ILOM/docs

Selecting the Boot Media Option

You can start the operating system installation to the server by booting from a local or remote
installation media source. This section identifies the supported media sources and the setup
requirements for each source.
"Viewing or Modifying the Service Processor Network Settings" in
start /HOST/console
.
About Oracle Solaris Operating System Installs
Selecting the Boot Media Option
http://www.
13