Add Yourself To A Call On A Shared Line - Cisco 6800 Series User Manual

Calls
• If your coworker answers the call, the shared line button and the session button are solid red on your
• If you put a call on hold, your line button is solid red and the session button pulses red. Your coworker's
• Once the shared line is configured, the call bridge can be invoked by using either
Soft keys can be configured at three levels. See
configure soft keys at organization, location and device level.

Add yourself to a call on a shared line

You or your coworker can join a call on the shared line. Your administrator needs to enable the feature on
your phone.
If a user with whom you share a line has privacy turned on, you can't see their line settings and you can't add
yourself to their call.
Procedure
Step 1 Press the line button for the shared line.
Step 2 Enter *33 on your phone.
Note
Step 3 Enter the phone number of the person whose call you want to barge in to.
phone.
line button is also solid red and the session button pulses red.
• FAC Code
• Soft keys
Here is an example of customize PSK settings to add new soft key for Call Bridge as shown below:
If set up this way, you'll hear a tone letting you know that the system recognizes the access code.
Configure and modify device settings in Webex Calling
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
Add yourself to a call on a shared line
to
79