Disable A Vpn Connection - Cisco 6800 Series User Manual

Settings
Step 3
Highlight Enable VPN connection, press the Select button of the navigation cluster to select On to apply
the changes.
Note
The VPN connection takes about one minute.
After your phone reboots, the VPN connection icon
that the VPN connection is established successfully.
If the VPN connection fails, the value of Enable VPN connection remains Off.
Step 4 (Optional) View the details of the VPN connection. For example, the current VPN connection status and VPN
IP address. For details, see

Disable a VPN Connection

You can disable a VPN connection by rebooting your phone in an automatic or manual way.
Before you begin
A VPN connection is enabled on your phone.
Procedure
Step 1 Press Applications
Step 2
Select Network configuration > VPN settings.
Step 3 Highlight Connect to VPN on bootup, press the Select button of the navigation cluster to select Off.
Step 4 Press Set to save the setting.
Step 5 Do one of the following actions:
• Highlight Enable VPN connection, select Off.
• Manually reboot your phone, see
The VPN disconnection takes about one minute.
After the phone reboots, the VPN connection icon
VPN connection is disabled successfully.
Step 6 (Optional) Check whether the VPN connection is
page
Once you set Enable VPN connection to On, the phone immediately tries to connect to the VPN
server. During the process, the phone reboots automatically.
View the VPN Status, on page
.
Once you set Enable VPN connection to Off, the phone immediately tries to disconnect
Note
from the VPN server. During the process, the phone reboots automatically.
150.
on the upper-right corner of the phone screen indicates
150.
Reboot Your Phone, on page
on the phone screen disappears. This means that the
. For details, see
Disconnected
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
Disable a VPN Connection
163.
View the VPN Status, on
149