Cisco 6800 Series User Manual page 156

Scan and Save a Wi-Fi Network
Procedure
Step 1
Press Applications
Step 2 Select Network configuration > Wi-Fi configuration > Wi-Fi profile.
Step 3
In the Wi-Fi profile screen, press Scan to get all available wireless networks.
Step 4 (Optional) In the Connect to Wi-Fi screen, press Scan again to rescan the list.
Step 5
Select a wireless and press Select or the Select button.
Step 6 In the Setup Wi-Fi screen, set the parameters as mentioned in the Profile Parameters table.
Table 16: Profile Parameters
Parameter
Security mode
Network name
User ID
Password
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
142
.
Description
Allows you to select the authentication method that is used to secure
access to the Wi-Fi network. Depending on the method you choose, a
password, passphrase, or key field appears so that you can provide the
credentials that are required to join this Wi-Fi network. Options are:
• Auto
• EAP-FAST
• PEAP-GTC
• PEAP-MSCHAPV2
• PSK
• WEP
• None
Default: PSK
Allows you to enter a name for the SSIDs. This name displays on the
phone. Multiple profiles can have the same network name with different
security mode.This name displays on the phone.
Allows you to enter a user ID for the network profile.
This field is available when you set the security mode to Auto,
EAP-FAST, PEAP-GTC, PEAP-MSCHAPV2. This is a mandatory field
and it allows maximum length of 32 alphanumeric characters.
Allows you to enter password for the network profile that you create.
This field is available when you set the security mode to Auto,
EAP-FAST, PEAP-GTC, PEAP-MSCHAPV2. This is a mandatory field
and it allows maximum length of 64 alphanumeric characters.
Settings