Table of Contents
Advertisement
5
Service and Maintenance
5.1
Servicing Record
1. Grease: Use an SAE multi-purpose high temperature grease with extreme pressure (EP)
characteristics. Also acceptable is an SAE multipurpose lithium based grease.
2. Lubricants: Your unit can oper ate at top efficiency only if clean lubr icants ar e used.
Use clean containers to handle all lubricants. Store them in an area protected from dust,
moisture and other contaminants. Gearbox on Model 2958 takes 300ml of SAE 80W-90 Gear
Oil.
MAINTENANCE
8 Hours, Daily or 10 Bales
L
PTO Shaft (8)
I
Rotor and Flails
I
Wheel Bearings
I
Shear Bolts
I
Gearbox Seals
Weekly or 50 Bales
G Bale Cradle Bushings (4)
G Bale Lift Bushing Bushings (8)
G Rotor/Roller Bearings (6)
Annually or 3000 Bales
G Wheel Bearings
L Gearbox—Change Oil
W Machine
Action Code: L = Lubricate
Hours
Serviced
By
G = Grease
W = Wash
- 5.1 -
I = Inspect
Advertisement
Table of Contents
