Page 1
Loadmaster Loadmaster 2X 9230 9230 WARNING WARNING READ AND UNDERSTAND THIS MANUAL BEFORE READ AND UNDERSTAND THIS MANUAL BEFORE OPERATING THIS EQUIPMENT. UNSAFE OPERATION OPERATING THIS EQUIPMENT. UNSAFE OPERATION OR MAINTENANCE OF THIS EQUIPMENT CAN RESULT OR MAINTENANCE OF THIS EQUIPMENT CAN RESULT IN SERIOUS INJURY OR DEATH.
H&S WARRANTY H&S Manufacturing Co., Inc. (“H&S”) warrants this product to be free from defect in material and workmanship. Except as noted below, this warranty term is twelve (12) months on labor, and twenty-four (24) months on parts from the date of delivery of the product to the original purchaser by an authorized H&S dealer.
MANUFACTURER’S STATEMENT Congratulations on your selection of an H&S Product. Your New H&S Product has been manufactured of the finest quality materials and components. The performance you receive from your machine is largely dependent upon how well you read, understand this manual, and apply this knowledge. There is a right and a wrong way to do everything.
DEALER PRE-DELIVERY CHECKLIST AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS After the 2X has been completely set up, check to be certain it is in correct operating order before delivering to the customer. The following is a list of points to inspect. Check off each item as you have made the proper adjustments and found the item operating satisfactorily.
DEALER DELIVERY CHECKLIST AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS This checklist that follows is an important reminder of valuable information that should be passed on to the customer at the time this 2X is delivered. Check off each item as you explain it to the customer. This delivery checklist, when properly filled out and signed assures the customer that the Pre- delivery service was satisfactorily performed.
SAFETY INFORMATION YOUR SAFETY ALERT! IS INVOLVED. THIS SYMBOL IS USED THROUGHOUT THIS BOOK WHENEVER YOUR PERSONAL SAFETY IS INVOLVED. TAKE TIME TO BE CAREFUL. REMEMBER: THE CAREFUL OPERATOR IS THE BEST OPERATOR. MOST ACCIDENTS ARE CAUSED BY HUMAN ERROR. CERTAIN PRECAUTIONS MUST BE OBSERVED TO PREVENT THE POSSIBILITY OF INJURY OR DAMAGE.
SAFETY INFORMATION Keep signs in good condition. Immediately replace any missing or damaged signs. RECOGNIZE SAFETY INFORMATION This is the safety alert symbol. When you see this symbol on your machine or in this manual, be alert to the potential for personal injury.
SAFETY INFORMATION W A R N I N G TO PREVENT SERIOUS INJURY OR DEATH BEFORE YOU ATTEMPT TO OPERATE THIS EQUIPMENT, READ AND STUDY THE FOLLOWING INFORMATION. IN ADDITION, MAKE SURE THAT EVERY INDIVIDUAL WHO OPERATES OR WORKS WITH THIS EQUIPMENT, WHETHER FAMILY MEMBER OR EMPLOYEE, IS FAMILIAR WITH THESE SAFETY PRECAUTIONS.
CAP SCREW TORQUE VALUES The specifications below are the torque values for fasteners as it adheres to the SAE torque value standards. All fasteners should be torqued to the proper values found in the figures below unless otherwise specified by the engineering drawing. •...
SET-UP & ASSEMBLY Note: Determine right and left side of the by viewing it from the rear. If instructions or parts lists call for hardened bolts, refer to Cap Screw Torque Values page to identify. 1. If you are assembling the 2X Box refer to the appropriate assembly instructions. 2.
TRANSPORTING When transporting on the highway or roads; • An SMV mount bracket is located on the rear of the 2X. Always use the slow-moving vehicle emblem when transporting. Keep the SMV emblem and all reflectors clean and visible to warn other motorists. •...
OPERATION UNLOADING/DUMPING THE WAGON 1. When dumping into a truck, or other receiving vehicle, choose a level area, free of obstructions. 2. With the operator in the tractor seat, and all others well clear of the 2X, actuate the “LIFT” hydraulic control valves of the boxes to raise to the desired dumping height.
LIGHTING The 2X features highway lighting and a beacon. The light bar can be folded up for field operation as shown in the picture below. The 2X also features LED lighting on the right hand side of each box as shown in the right hand picture below.
OPTIONAL EQUIPMENT HDBODE36 - EXTENSION KIT Dumping Lip Extension w/Front & Rear Flares for 36’ semi-box HDBODE40 - EXTENSION KIT Dumping Lip Extension w/Front & Rear Flares for 40’ semi-box LUBRICATION GUIDE Become familiar with all lubrication points and establish a systematic routine to ensure complete and quick lubrication of the machine.
DECAL LOCATION Your H&S 2X was manufactured with operator safety in mind. Located on the 2X are various decals to aid in operation and warn of caution areas. Pay close attention to all decals. DO NOT REMOVE ANY OF THESE DECALS. IF DECALS ARE LOST, DAMAGED, OR IF THE 2X IS REPAINTED, REPLACE DECALS.
TROUBLESHOOTING WARNING; MAKE SURE THAT THE TRACTOR IS SHUT OFF AND THE TRAILER CANNOT MOVE BEFORE SERVICING THE 2X. MAINTENANCE AND REPAIR SERVICE WORK MUST BE PERFORMED BY A QUALIFIED SERVICE PERSON ONLY. SYMPTOM POSSIBLE CAUSE POSSIBLE REMEDY Box will not •...
Page 34
H&S MFG. CO. products approved for the FEMA SEAL OF QUALITY Manufactured by: H&S MANUFACTURING CO., INC. 2608 S. HUME AVE. MARSHFIELD, WI 54449 (715) 387-3414 | hsmfgco.com...