4.7 Field Operation
4.7.1 Loading and Processing
1) Lower bale tines to ground.
2) Back processor up with the bale tines
sliding under the bale.
3) Slowly raise the tines until the bale
clears the ground.
4) Remove strings, twine, or wrapping
from the bale.
*** STOP CRADLE WHEN LOADING BALES INTO PROCESSOR ***
5) Raise the bale tines up and tip the bale
into the bale cradle.
*** STOP CRADLE WHEN LOADING BALES INTO PROCESSOR ***
- 4.8 -