Toyota C-HR 2020 Manual page 189

Shift position purpose
Shift position
P
R
N
D
M
*
1
: To improve fuel efficiency and reduce noises, set the shift lever in D for
normal driving.
*
2
: Selecting gear step using the M position achieves suitable engine braking
forces by operating the shift lever.
Selecting a driving mode
P. 267
Changing gear steps in the M position
To enter 7-speed sport sequential shiftmatic mode, shift the shift lever
to M position. Gear steps can then be selected by operating the shift
lever, allowing you to drive in the gear step of your choosing.
Upshifting
Downshifting
The gear changes once every time
the shift lever is operated.
The selected gear step, from M1 to
M7, will be displayed in the meter.
However, even when in the M position, the gear steps will be auto-
matically changed if the engine speed is too high, or too low.
C-HR_OM_USA_OM10634U
4-2. Driving procedures
Objective or function
Parking the vehicle/starting the engine
Reversing
Neutral
Normal driving
7-speed sport sequential shiftmatic mode driving
(P. 189)
189
*
1
*
2
1
2
4