Toyota C-HR 2020 Manual page 197

■
Parking brake indicator light and parking brake lamp
●
Depending on the engine switch position/mode, the parking brake indicator
light and parking brake lamp will turn on and stay on as described below:
Vehicles without a smart key system

In the "ON" position: Comes on until the parking brake is released.
Not in the "ON" position: Stays on for approximately 15 seconds.
Vehicles with a smart key system

IGNITION ON mode: Comes on until the parking brake is released.
Not in IGNITION ON mode: Stays on for approximately 15 seconds.
● When the engine switch is turned off with the parking brake set, the parking
brake indicator light and parking brake lamp stay on for about 15 seconds.
This does not indicate a malfunction.
■
Changing the mode
When changing the automatic mode on/off, the message will be shown on the
multi-information display and the buzzer sounds.
■
Parking the vehicle
P. 163
■
Parking brake engaged warning buzzer
A buzzer will sound if the vehicle is driven with the parking brake engaged.
"EPB Applied." is displayed on the multi-information display.
■ Warning messages and buzzers
Warning messages and buzzers are used to indicate a system malfunction or
to inform the driver of the need for caution. If a warning message is shown on
the multi-information display, read the message and follow the instructions.
■
If the brake system warning light comes on
P. 423
■
Usage in winter time
P. 293
C-HR_OM_USA_OM10634U
4-2. Driving procedures
197
4