Toyota C-HR 2020 Manual page 98

98
2. Instrument cluster
Operating the meter control switches
The multi-information display is
operated using the meter control
switches.
Return to the previous screen
Enter/set
Select an item/change pages
Drive information
● Current fuel consumption (bar type/numerical value)
Displays the current rate of fuel consumption.
● Average fuel consumption (after reset
Displays the average fuel consumption since the function was reset, the
engine was started, and the vehicle was refueled, respectively
Use the displayed average fuel consumption as a reference.
● Average vehicle speed (after reset
Displays the average vehicle speed since the function was reset and the
engine was started, respectively
● Elapsed time (after reset
Displays the elapsed time since the function was reset and the engine was
started, respectively
● Distance (range/after start)
Displays the estimated maximum distance that can be driven with the
quantity of fuel remaining and the distance driven after the engine was
started, respectively
• This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
• When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
C-HR_OM_USA_OM10634U
* 2
/after start/after refuel)
* 2
/after start)
* 2 * 1
/after start)
* 1
* 1
* 1
* 1