Toyota C-HR 2020 Manual page 123

■
Switching the door unlock function (vehicles with a smart key system)
It is possible to set which doors the entry function unlocks using the wireless
remote control.
Turn the engine switch off.
1
When the indicator light on the key surface is not on, press and hold
2
approximately 5 seconds while pressing and holding
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at least
5 seconds, and repeat step
Multi-information
display
■
Open door warning buzzer
If a door or the back door is not fully closed, a buzzer will sound when the
vehicle speed reaches 3 mph (5 km/h).
The open door(s) or back door is indicated on the multi-information display.
■
Conditions affecting the operation of the smart key system or wireless
remote control
Vehicles without a smart key system

P. 113
Vehicles with a smart key system

P. 134
■
Customization
Settings (e.g. unlocking function using a key) can be changed.
(Customizable features: P. 488)
C-HR_OM_USA_OM10634U
3-2. Opening, closing and locking the doors
.)
2
Unlocking function
Holding the driver's door
handle unlocks only the
driver's door.
Holding the front passen-
ger's door handle unlocks
all the doors.
Holding a door handle
unlocks all the doors.
123
for
2
.
Beep
Exterior: Beeps 3 times
Interior: Pings once
Exterior: Beeps twice
Interior: Pings once
3