Toyota C-HR 2020 Manual page 258

258
4-5. Using the driving support systems
Adjusting the set speed
To change the set speed, operate the lever until the desired set speed
is displayed.
Increases the speed
(Except when the vehicle has been
stopped by system control in vehi-
cle-to-vehicle
mode)
Decreases the speed
Fine adjustment:
move the lever in the desired
direction.
Large adjustment: Hold the lever up or down to change the speed,
and release when the desired speed is reached.
In the vehicle-to-vehicle distance control mode, the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 mph (1.6 km/h)
the lever is operated
For the U.S. mainland, Hawaii

Large adjustment: Increases or decreases in 1 mph (1.6 km/h)
*
(0.6 mph)
For Canada, Guam and Puerto Rico

Large adjustment: Increases or decreases in 5 mph (8 km/h)
*
(3.1 mph)
In the constant speed control mode (P. 262), the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 mph (1.6 km/h)
the lever is operated
Large adjustment: The speed will continue to change while the lever is
held.
*
1
: When the set speed is shown in "MPH"
*
2
: When the set speed is shown in "km/h"
C-HR_OM_USA_OM10634U
distance control
Momentarily
2
increments for as long as the lever is held
2
increments for as long as the lever is held
*
1
or 1 km/h (0.6 mph)
*
1
or 1 km/h (0.6 mph)
*
2
each time
*
1
or 1 km/h
*
1
or 5 km/h
*
2
each time