Toyota C-HR 2020 Manual page 270

270
4-5. Using the driving support systems
Turning the BSM function on/off
Press "" or "" of the meter control switches, select
1
Press "" or "" of the meter control switches, select
2
Press "" or "" of the meter control switches, select
3
When the BSM function is disabled, the BSM OFF indicator (P. 89) illu-
minates.
(Each time the engine switch is turned off then changed to ON, the BSM
function will be enabled automatically.)
■
The outside rear view mirror indicators visibility
When under strong sunlight, the outside rear view mirror indicator may be dif-
ficult to see.
■
When "Blind Spot Monitor Unavailable." is shown on the multi-informa-
tion display
Water, snow mud, etc., may be built up in the vicinity of the sensor area of
bumper (P. 272).
Removing the water, snow, mud, etc., from the vicinity of the sensor area
bumper should return it to normal.
Also, the sensor may not function normally when used in extremely hot or
cold weather.
■
When "Blind Spot Monitor System Malfunction. Visit Your Dealer." is
shown on the multi-information display
There may be a sensor malfunction or misaligned. Have the vehicle
inspected by your Toyota dealer.
■
Customization
Some functions can be customized. (P. 496)
C-HR_OM_USA_OM10634U
.
.
.