Toyota C-HR 2020 Manual page 182

182
4-2. Driving procedures
Stopping the engine
Stop the vehicle.
1
Set the parking brake (P. 195), and shift the shift lever to P.
2
Press the engine switch.
3
Release the brake pedal and check that "ACCESSORY" on the
4
multi-information display is off.
Changing engine switch modes
Modes can be changed by pressing the engine switch with brake
pedal released. (The mode changes each time the switch is pressed.)
*
Off
The emergency flashers can be
used.
The multi-information display will
not be displayed.
ACCESSORY mode
Some electrical components such
as the audio system can be used.
"ACCESSORY" will be displayed
on the multi-information display.
IGNITION ON mode
All electrical components can be
used.
"IGNITION ON" will be displayed on the multi-information display.
*
: If the shift lever is in a position other than P when turning off the engine,
the engine switch will be turned to ACCESSORY mode, not to off.
C-HR_OM_USA_OM10634U
ACCESSORY
IGNITION ON