Toyota C-HR 2020 Manual page 364

364
6-3. Do-it-yourself maintenance
How to initialize the tire pressure warning system
■
Park the vehicle in a safe place and turn the engine switch to the
1
"LOCK" position (vehicles without a smart key system) or off
(vehicles with a smart key system).
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire inflation
2
pressure level. (P. 470)
Make sure to adjust the tire pressure to the specified cold tire infla-
tion pressure level. The tire pressure warning system will operate
based on this pressure level.
Turn the engine switch to the "ON" position (vehicles without a
3
smart key system) or IGNITION ON mode (vehicles with a smart
key system).
Press "" or "" of the meter control switch to select
4
(P. 98)
Press "" or "" of the meter control switch to select the "Vehicle
5
Settings" and then press
Press "" or "" of the meter
6
control
.
Press "" or "" of the meter control switch to select "SET" and
7
then press and hold
When initialization completes, a message is displayed on the
8
multi-information display and the tire pressure warning light will
blink 3 times.
switch to select
and then press
.
to display the menu.
.