Toyota C-HR 2020 Manual page 63

Run the seat belt through the
4
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
Fully extend the shoulder belt
5
and allow it to retract to put it
in lock mode. In lock mode,
the belt cannot be extended.
While
6
restraint system into the rear
seat, allow the shoulder belt
to retract until the child
restraint system is securely
in place.
After the shoulder belt has
retracted to a point where there
is no slack in the belt, pull the
belt to check that it cannot be
extended.
If the child restraint has a top tether strap, follow the child
7
restraint manufacturer's operation manual regarding the installa-
tion, using the top tether strap to latch onto the top tether strap
anchor. (P. 70)
After installing the child restraint system, rock it back and forth to
8
ensure that it is installed securely. (P. 66)
C-HR_OM_USA_OM10634U
pushing the child
1-2. Child safety
63
1