ACME PIXEL LINE IP User Manual page 19

No DMX Status
View DMX Value
Connect Option
Network
Art-Net Settings
Select No DMX Status, press ENTER.
Use UP/DOWN button to select one of the following status:
Hold (The device continues to operate in the current mode with the last
active DMX values until the signal returns)
Blackout (Fixture blacks out if DMX signal stops)
Manual (The device accepts the DMX value stored in the 'Manual Mode'
menu)
Confirm your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select View DMX Value, press ENTER.
Use UP/DOWN button to select the desired DMX channel, for which the
value is to be displayed.
To exit the menu, press MENU, or wait 30 seconds.
Select Connect Option, press ENTER.
Use UP/DOWN button to select Auto, DMX, Art-Net or sACN, confirm
your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Network, press ENTER.
Use UP/DOWN button to select IP Address or Subnet Mask, confirm
your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Art-Net Settings, press ENTER.
Use UP/DOWN button to select Net, Sub-Net or Universe, confirm your
selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
- 18 -