Assembly - Pro-Form PFBE01320.0 User Manual

ASSEMBLY

• To hire an authorized service technician to
assemble this product, call 1-800-445-2480.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.
• To identify small parts, see page 6.
1. Go to my.proform.com on your computer and
register your product.
• documents your ownership
• activates your warranty
• ensures priority customer support if assistance
is ever needed
Note: If you do not have internet access, call
Customer Care (see the front cover of this man-
ual) and register your product.
2. Locate the Stabilizer (6) that does not have
warning decals on it. Orient the Stabilizer so that
the widest sides (A) of the Stabilizer Caps (13)
touch the floor.
Attach the Stabilizer (6) to the Frame (1) with
two M10 x 65mm Carriage Bolts (14) and two
M10 Locknuts (15); do not fully tighten the
Locknuts yet.
• In addition to the included tool(s), assembly
requires the following tools:
two adjustable wrenches
one Phillips screwdriver
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1
2
13
7
15
1
6
A
14
A
13