Pro-Form PFBE01320.0 User Manual page 11

9. Attach the Seat (7) to the Seat Frame (4) with
two M6 x 16mm Screws (21), an M6 x 55mm
Screw (23), and an M6 Washer (22); start all
the Screws, and then tighten them. To avoid
damaging the Seat, tighten the Screws only
until the Seat does not move or feel loose.
Note: To adjust the angle of the Seat (7), see
ADJUSTING THE SEAT on page 12.
10. Make sure that all parts of the weight bench are properly tightened. Extra parts may be included. Place a
mat under the weight bench to protect the floor.
9
7
4
21
22
23
11
21