Table of Contents
Advertisement
Chapter 3: System Setup
Panel Mount Kit (Optional)
1. The optional mounting clamps must be attached along the rear edges
of the Panel PC.
OPPC 1540T Series
OPPC 1940T Series
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
2. Position the mounting clamps along the rear edges of the Panel PC.
The first and second clamps must be positioned and secured diagonally
prior to mounting the rest of the clamps. Tighten the clamp's screw
until it touches the panel. Do not overtighten the screws to prevent
damaging the Panel PC.
Clamp
Panel
72
OPPC 1240T/1540T/1740T/1940T Series User Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the OPPC 1240T Series and is the answer not in the manual?