Chapter 3: System Setup; Installing A Sata Hard Drive - Nexcom OPPC 1240T Series User Manual

Chapter 3: System Setup

C 3: s
haPter ystem

Installing a SATA Hard Drive

Prior to removing the chassis cover, make sure the unit's power is
off and disconnected from the power sources to prevent electric
CAUTION! CAUTION! CAUTION!
shock or system damage.
1. Remove the mounting screws around the chassis cover and then
remove the cover.
The dots denote the locations of the screws.
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
47
OPPC 1240T/1540T/1740T/1940T Series User Manual