Table of Contents
Advertisement
Chapter 1: Product Introduction
Knowing Your OPPC Series
Rear Bottom
PS/2 KB/MS
Line-out
USB 3.0
USB 2.0
Remote
LAN 1
LAN 2
On/Off
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
COM 2
VGA
COM 1
Reset
12V-30V
DC Input
PS/2 KB/MS
Used to connect a PS/2 keyboard or a PS/2 mouse.
Line-out
Used to connect a headphone or a speaker.
Remote On/Off Switch
Used to connect a remote to power on/off the system.
LAN 1 and LAN 2
Used to connect the system to a local area network. LAN 1 supports Wake
up on LAN.
USB 2.0
Dual USB 2.0 port for connecting USB 2.0/1.1 devices.
USB 3.0
Single USB 3.0 port for connecting the system with USB 3.0/2.0 devices.
COM 1 and COM 2
These COM ports support RS232/422/485 compatible series device through
BIOS setting, and have 2.5kV isolated protection.
Reset Button
Press this button to restart the system.
VGA
Used to connect an analog VGA monitor.
12V-30V DC Input
Used to plug a DC power cord.
13
OPPC 1240T/1540T/1740T/1940T Series User Manual
Advertisement
Table of Contents
