Zero Touch Cloud Service - Check Point QUANTUM SPARK 1595R Getting Started Manual

Zero Touch Cloud Service

The Zero Touch Cloud Service lets you easily manage the initial deployment of your gateways in the
Touch portal.
Zero Touch enables a gateway to automatically fetch settings from the cloud when it is connected to the
internet for the first time.
Note - If you already used the First Time Configuration Wizard to configure your
appliance, you cannot use the Zero Touch Cloud service. If you start the First Time
Configuration Wizard while the Zero Touch settings are being installed, the installation
process terminates.
If the gateway connects to the internet via DHCP, the gateway will fetch the Zero Touch settings without any
additional action. If no DHCP service is available, you must run the First Time Configuration Wizard,
configure the Internet Connection settings, and then fetch the settings from the Zero Touch server.
To connect to the Zero Touch server from the First Time Configuration Wizard:
1. In the Welcome
2. In the window that opens, click
3. The Internet connection
connection and click Connect.
The settings are automatically downloaded and installed.
A new window opens and shows the installation status. It may take several minutes until the
installation is complete.
When you reconnect to the appliance WebUI or click Refresh, you may see one of these:
Login page - This means the process ended successfully and your settings are installed.
n
Welcome page of the First Time Configuration Wizard - The process is still running. The settings are
n
installing or they do not exist in the cloud.
Note - If you click
installation process terminates.
Page not found - The appliance local IP address may have been changed by the cloud settings
n
installation. Try http://my.firewall or consult your administrator for the new local IP address.
After the gateway downloads and successfully applies the settings, it does not connect to the Zero Touch
server again.
For more information on how to use Zero Touch, see
Administration Guide
.
Retries mechanism:
During cloud activation, there are sometimes temporary issues which prevent the gateway from activating
Cloud Services. See the
page of the First Time Configuration Wizard, click
Yes to confirm that you want to proceed.
page of the First Time Configuration Wizard opens. Configure your Internet
Next on the
Management LED description in the
Welcome page, the Zero Touch settings
sk116375 and the
"Front Panel" on page 23
Quantum Spark 1595R Getting Started Guide | 58
Zero Touch Cloud Service
Fetch Settings from the
R80.20 ZeroTouch Web Portal
section.
Zero
cloud.