Appliance Date And Time Settings - Check Point QUANTUM SPARK 1595R Getting Started Manual

Appliance Date and Time Settings

In the Appliance Date and Time Settings
manually or use the Network Time Protocol option.
If you select the option Set the time
the initial values. If necessary, change the time zone setting to show your correct location. Daylight Savings
Time is automatically enabled by default. You can change this in the WebUI application on the
Date and Time page.
Date - The date on your computer appears by default. If required, set a different date.
n
Time - The time on your computer appears by default. If required, set a different time.
n
Time Zone - The time zone on your computer appears by default. If required, select a time zone
n
setting to reflect your exact location.
Primary NTP server
n
ntp.checkpoint.com
Secondary NTP server
n
ntp2.checkpoint.com
page, configure the appliance's date, time, and time zone settings
manually, the appliance uses the date and time from your computer as
- The IP or host name of the primary NTP server. The default server is
- The IP or host name of the secondary NTP server. The default server is
Appliance Date and Time Settings
Quantum Spark 1595R Getting Started Guide | 41
Device >