Yamaha MIO Service Manual page 39

Part to be tightened
Seat lock assembly and frame
Rear fender
Rectifier/regulator
Footboard and frame
Leg shield and frame
License plate bracket and license plate stay
License plate stay and frame
Horn bracket and license plate stay
Main switch and frame
Spoke
NOTE:
1. First tighten the ring nut (lower) 30 Nm (3.0 m • kg, 22 ft • lb) by using the torque wrench, then
loosen the ring nut quarter turn.
2. Then, hold the ring nuts (lower) and tighten the ring nut (upper) 75 Nm (7.5 m • kg, 54 ft • lb) by
using the torque wrench.
TIGHTENING TORQUES
Thread size
M6
M6
M6
M6
M6
M6
M6
M6
M6
—
2 - 19
SPEC
Tightening torque
Nm m · kg ft · lb
7 0.7 5.1
8 0.8 5.8
7 0.7 5.1
7 0.7 5.1
7 0.7 5.1
7 0.7 5.1
7 0.7 5.1
7 0.7 5.1
7 0.7 5.1
3 0.3 2.2
Remarks