Dealer Pre-Delivery Checklist - H&S FORAGE BOX Operator's Manual

DEALER PRE-DELIVERY CHECKLIST

AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS
After the Forage Box has been completely set up, check to be certain it is in correct operating order
before delivering to the customer. The following is a list of points to inspect. Check off each item as
you have made the proper adjustments and found the item operating satisfactorily.

Forage Box was not damaged in shipment. Check for dents and loose or missing parts.
Report damage immediately to H&S Manufacturing Co., Inc.

Forage Box has been correctly assembled according to instructions in this manual.
Fasteners are tightly secured.

All bolts and fasteners are tight.

All shields and guards are in place and fastened.

All grease fittings have been lubricated. Gearboxes are filled to proper levels if applicable.
See Lubrication Chapter of this manual for details.

Hoses and fittings if applicable, are properly attached and there are no visible leaks.

All drive chains are adjusted to proper tension. See Adjustment Chapter of this manual.

Decals are in place and legible.

Connect the Forage Box to a tractor and attach the hydraulic hoses

Connect the lights to the tractor. Lights and wiring functioning properly.

Connect the control box to the electrical cord plug pigtail off of the 7-pin plug.

Run the Forage Box and make sure all components operate properly.

Hydraulic system does not leak under pressure.
Model Number ______________________________________________
Serial Number ______________________________________________
Dealer's Name_________________________________________________________________
Inspection Date _____________________________________________
Signature of Pre-Delivery Inspector_________________________________________________
-5-