Set-Up & Assembly - H&S FORAGE BOX Operator's Manual

WARNING: Some photographs used in the following pages show guards or
shields removed for clarification. Never operate machine until these guards or
shields are in proper operating position.
NOTE: Determine right or left side of the Machine by viewing it from the rear. If instructions or parts
lists call for hardened bolts, refer to Cap Screw Torque Values chart.
1. Check the Forage Box for proper assembly and adjustment. Make sure that all bolts are
tightened.
2. Properly lubricate the Forage Box before operating. Refer to Lubrication Section of this
Operator's Manual for locations.
3. Check all lights to make sure that they are functioning properly.
SET-UP & ASSEMBLY
-16-