SAFETY INFORMATION
W A R N I N G
TO PREVENT SERIOUS INJURY OR DEATH, NEVER OPERATE THIS UNIT
UNLESS THE EMERGENCY STOP FUNCTIONS PROPERLY
EMERGENCY STOP
1. In case of an emergency, pushing
the emergency stop panel rearward, or
pulling the trip cables will stop the cross
conveyor, beaters, and main apron.
2. Keep excessive slack out of the trip
cables.
3. Trip the emergency stop occasionally,
and when starting the unit after periods of
storage to ensure proper function.
4. To reset, turn the control box switch
back to the OFF/RESET position,
then rotate the switch back to one the
unloading positions.
-14-