Different IP Camera -- device stream type, encoding, frame rate and other
information in the drop-down menu options are also different.
Only cameras that support the H264/H264+ function display Profile items on the
video interface.
When the frame rate is set too low, it will cause video lag. Please be careful.
The higher the bit rate is, the greater the current network bandwidth and the greater
the transmission pressure will be.
Only cameras that support the H264+/H265+ function displaying H264+/H265+ on/off
items on the video interface.
It takes 30-60 seconds for the camera to turn the H265+/H264+ on or off. Please be
patient.
6.4.2 Audio
In the main interface, click "Config Video Audio" to enter the audio configuration interface,
where you can set the device audio input mode. Select the audio code and set the input
volume, as shown in Figure 6-10:
【Enable Audio】Turn on / off device audio input.
【Audio Input】Select the audio input method.
【Audio Encode】Choose audio encoding, G711U/ G711A /AAC.
【Input Volume】Set the device input volume, the volume range is 0-100.
User's Manual of ICA-3480F/ICA-4480F
Figure 6-10
46