Planet ICA-3480F User Manual page 35

【BITVISION Port】When the BitVision App is directly connected to the device, the "Private
port" is entered into the BITVISION port.
【ONVIF Port】When the IP Camera accesses ONVIF agreement with the back-end
equipment, the ONVIF protocol needs to be enabled.
Please do not arbitrarily modify the port parameters; when there is a port conflict,
you need to modify the port number as follows:

HTTP and HTTPS port: Use the browser login to add the address after the
port number. You need tp enter the HTTP port number (for example, 8555)
that you want to change via the browser login.http://192.168.1.168:8555.

Make sure RTSP port (real-time transmission protocol port) is available for
modification.
② DDNS
In the main interface, click "Config  Network  Basic Setup  DDNS" to enter the DDNS
function settings interface, where you can open the IP Camera DDNS function. Select the
DDNS type and enter the site name, corresponding to DDNS type user name and password,
and click "Apply", as shown in Figure 6-6 ③.
User's Manual of ICA-3480F/ICA-4480F
Figure 6-6 ②
35