User's Manual of ICA-3480F/ICA-4480F
【Time interval】 The time interval between the IP Camera and the SNTP server is 1 minute by
default. You can set "1 ~ 10080".
【Set Manually/Time Settings】Enable and set the IP Camera date and time manually, click
on the "Apply" after completing the settings.
【Time in Camera】Displays the current time of the device.
【Synchronize with Computer time】The IP Camera will synchronize with the computer time
and date that you connect currently. Click on the "Apply" after completing the settings.
【Prohibit NVR to modify IPC time】The IP Camera time will not be affected by the backend
storage devices (such as NVR, etc.) after checking this option. The IP Camera time will run
according to the user settings.
② DST
Daylight saving time (DST) refers to the system of artificially stipulating local time for energy
conservation. The unified time used during the implementation of this system is called "DST".
In the System Configuration interface, click "DST" to enter the daylight saving time setting
interface, where you can enable daylight saving time, set daylight saving time, end time and
end time, as shown in Figure 6-3:
Figure 6-3
6.2.2 Security
In the main interface, click "Config System Security" to enter the user management
settings interface, where you can add, edit and delete the user, and you can also query the
current user information. The current user name for the administrator is "admin". You can
create up to 10 user names, as shown in Figure 6-4:
30