Step 1: In the main interface, click "Configuration → Events → Ordinary Events →
ROI" to enter the ROI setting interface, as shown in Figure 6-28.
Step 2: 【Region Settings】Move the mouse to the preview screen, hold down the left
mouse button to select the ROI area range, and release the left mouse button to complete
the area drawing. You can also enter the X, Y, W, and H corresponding positions in the
corresponding area to set the area.
Step 3: 【Set "Relative QP value" or "Absolute QP value"】Select "Relative QP value" or
"Absolute QP value" in the corresponding area position and enter the corresponding
value.
Step 4: Click "Apply" to complete the ROI setting.
The ROI function depends on the specific model, and the ROI function is only
supported under the H.264 or H.265 code. Other codes do not support the
ROI function at this time.
Click 【Delete】 in the corresponding setting area to delete the corresponding
ROI area.
User's Manual of ICA-3480F/ICA-4480F
Figure 6-28
60