Table of Contents
Advertisement
【Enable】Turn on / off device video tampering alarm.
Step 2: Click "Enable" to turn on the Video Tampering function, click "Apply".
Step 3: Set the arming schedule.
As shown in Figure 6-25 below, you can view, edit, and delete the arming time of motion
detection. The default is to arm the alarm 24 hours a day. You can adjust the arming time as
follows:
-
Method 1: Click the arming time period, manually fill in the start time and end time, set up
and click "Apply". If you need to delete the time period, click the "Delete" button and then
reset the time period.
-
Method 2: Click the arming time period, two arrows will be displayed at both ends of the
time period. Move the adjustment arrow left or right to adjust the arming time.
-
You can set up more than one time period for up to 8 time periods.
-
After the day of deployment time is set, if the other time also needs to be set at the same
arming time, click the right side of the timeline "
check the "Select All" or a day, and then Click "OK".
After setting, click "Apply" to complete the setting of the arming time.
User's Manual of ICA-3480F/ICA-4480F
Figure 6-24
" copy button; in the "copy to" interface,
57
Advertisement
Table of Contents
