Table of Contents
Advertisement
User's Manual of ICA-3480F/ICA-4480F
Here to open the "General linkage", "Upload via FTP", "Upload via SMTP", "Upload via Cloud",
"Record via SDcard" function, when the device settings area is blocked and alarm, the
corresponding way to inform the user.
【Upload Via SMTP】Select and the system is configured with SMTP, the alarm information
will be sent to the SMTP recipient mailbox.
【Upload Via FTP】Select and the system is configured with the FTP server, it will send the
alarm information to the FTP server.
【Upload Via Cloud】Select and the system is configured with the cloud server, it will send
the alarm information to the cloud account.
④ Exception
In the main interface, click "Configuration Events Ordinary Events Exception" to enter
the exception settings interface, as shown in Figure 6-27.
Figure 6-27
Set the Exception Type to "Network Disconnected", "IP Address Conflicted" or "Full Disk"
alarms here, and set the alarm output mode. Click on the "Apply" after completing the settings.
⑤ ROI
ROI is the area of interest setting. Users can set the most concerned and most interested
area in the video screen through this function. IPC will improve the video image quality of
the corresponding area when video encoding, and reduce the encoding quality of other areas,
so as to highlight the image effect in the selected area.
The specific operation steps are as follows:
59
Advertisement
Table of Contents
