Audio - Planet ICA-3280 User Manual

【H265+/H264+】Turn on/off the camera H265+/H264+.
【Watermark】Turn on / off. It can prevent the video from being tampered after it is turned
on. After setting the "watermark name", use our "HSPlayer" player to query the video
information with watermark.
【Watermark name】Enter a watermark name.

Different IP Camera -- device stream type, encoding, frame rate and other
information in the drop-down menu options are also different.

When the frame rate is set too low, it will cause video lag. Please be
careful.

The higher the bit rate is, the greater the current network bandwidth and
the greater the transmission pressure will be.

Only cameras that support the H264+/H265+ function displaying
H264+/H265+ on/off items on the video interface.

It takes 30-60 seconds for the camera to turn the H265+/H264+ on or off.
Please be patient.

The IP camera SD card supports the watermark function during normal
video recording.

8.4.2 Audio

In the main interface, click "Configuration → Video → Audio" to enter the audio
configuration interface, where you can set the device audio input mode. Select the audio
code and set the input volume, as shown in Figure 8-22:
Figure 8-22